manualshive.com logo in svg

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point, Reference Manual

Share
Download
NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point Reference Manual Download Page 47

Basic Installation and Configuration 

47

 ProSAFE Dual Band Wireless N Access Point WNDAP350

Consult the product documentation for your wireless adapter; WPA client software for 
instructions on configuring WPA settings and WPA2 client software for instructions on 
configuring WPA2 settings.

Figure 25. Configure WPA-PSK and WPA2-PSK

To configure WPA-PSK and WPA2-PSK:

1. 

From the 

Network Authentication

 drop-down menu, select 

WPA-PSK & WPA2-PSK

. 

By default, 

Data Encryption

 will be set to 

TKIP+AES

.

2. 

Enter the WPA Passphrase (Network Key).

3. 

Wireless Client Security Separation is disabled by default. If enabled, associated wireless 
clients will not be able to communicate with each other. (This feature is intended for hotspots 
and other public access situations.

4. 

Click 

Apply

 to save your settings.

Restricting Wireless Access by MAC Address

The optional Access Control window lets you block the network access privilege of any 
specified stations through the WNDAP350 wireless access point. When you enable access 
control, the access point only accepts connections from clients on the selected access 
control list. This provides an additional layer of security.

Note:

If configuring the WNDAP350 from a wireless computer whose MAC 
address is not in the access control list, if you select Turn Access Control 
On, you will lose your wireless connection when you click 

Apply

. You 

must then access the wireless access point from a wired computer or 
from a wireless computer that is on the access control list to make any 
further changes.

Summary of Contents for WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands