manualshive.com logo in svg

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point, Reference Manual

Share
Download
NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point Reference Manual Download Page 10

Introduction 

10

ProSAFE Dual Band Wireless N Access Point WNDAP350 

Autosensing Ethernet Connections With Auto Uplink 

The WNDAP350 can connect to a standard Ethernet network. The LAN interface is 
autosensing and capable of full-duplex or half-duplex operation. 

The wireless access point incorporates Auto Uplink

TM

 technology. The Ethernet port will 

automatically sense whether the Ethernet cable plugged into the port should have a normal 
connection such as to a computer or an uplink connection such as to a switch or hub. That 
port will then configure itself to the correct configuration. This feature also eliminates any 
concerns about crossover cables, as Auto Uplink will accommodate either type of cable to 
make the right connection.

Compatible and Related NETGEAR Products

For a list of compatible products from other manufacturers, see the Wireless Ethernet 
Compatibility Alliance Web site (WECA, see 

http://www.wi-fi.net

). 

The following NETGEAR products work with the WNDAP350 wireless access point:

•

FS108P - ProSafe 8 Port 10/100 Switch with 4 Port PoE

•

FS116P ProSafe 16 Port 10/100 Desktop Switch with 8 Port PoE

•

FS726TP - ProSafe 24 Port 10/100 Smart Switch with 2 Gigabit Ports and 12 Port PoE

•

FS728TP - ProSafe 24+4 10/100 Smart Switch with full PoE

•

FS752TPS - ProSafe 48 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports and 24 
Port PoE

•

FSM7328PS - ProSafe 24-port 10/100 L3 Managed Stackable Switch with 24 PoE Ports

•

FSM7352PS

•

GS724TP

•

GS748TP

•

WNDA3100 - RangeMax Dual Band Wireless-N USB 2.0 Adapter

•

WN121T RangeMax NEXT Wireless-N USB 2.0 Adapter

•

WN111 - RangeMax Next Wireless-N USB Adapter

•

WN511B RangeMax NEXT Wireless-N Notebook Adapter 

•

WN311B RangeMax NEXT Wireless-N PCI Adapter

•

WAG511 ProSafe 108 Mbps Dual Band PC Card

•

WAG311 ProSafe 108 Mbps Dual Band PCI Card

•

WG311T 802.11g 108 Mbps Wireless PCI Card

•

WG511T 802.11g 108 Mbps Wireless CardBus Adapter

•

WG511 802.11g 54 Mbps Wireless CardBus Adapter

•

WG111 801.11g 54 Mbps Wireless USB Adapter

•

WPN111 - RangeMax Wireless USB 2.0 Adapter

Summary of Contents for WNDAP350 - ProSafe 802.11n Dual Band Wireless Access Point









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands