NETGEAR R6900v2 User Manual Download Page 110

Page: 110 / 229

11.

Select the Allow only approved devices check box.

12.

Click the Apply button.

Your settings are saved.

To approve another USB device that is not attached to a USB port, first remove the attached USB device from
the USB port (see

Safely Remove a USB Device

on page 110), attach the other USB device, and repeat this

procedure.

Safely Remove a USB Device

Before you physically disconnect a USB device from the USB port on the router, log in to the router and
take the drive offline.

To remove a USB device safely:

Launch a web browser from a computer or mobile device that is connected to the network.

Enter http://www.routerlogin.net.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

Select ADVANCED > USB Functions > ReadySHARE.

Share a Storage Device Attached to the Router

110

Nighthawk AC1900 Smart WiFi Router Model R6900v2

Summary of Contents for R6900v2






































































































































































































































Search results

Summary of Contents for R6900v2

Reviews:

Related manuals for R6900v2

Brands by name

Popular brands

NETGEAR R6900v2, User Manual

Search results

Summary of Contents for R6900v2

Reviews:

Related manuals for R6900v2

Brands by name

Popular brands