Administration
83
R6200v2 Smart WiFi Router
•
Connection
. This shows if the router is using a fixed IP address on the WAN. If the value
is DHCP Client, the router obtains an IP address dynamically from the ISP.
•
IP Subnet Mask
. The IP subnet mask used by the Internet (WAN) port of the router.
•
Domain Name Server
. The Domain Name Server addresses used by the router. A
Domain Name Server translates human-language URLs such as www.netgear.com into
IP addresses.
Show Statistics Button
To view statistics:
1.
Select
Advanced Home
or select
Administration > Router Status
.
2.
In the Internet Port pane, click the
Show Statistics
button.
The following information is displayed:
•
System Up Time
. The time elapsed since the router was last restarted.
•
Port
. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port,
the screen displays:
-
Status
. The link status of the port.
-
TxPkts
. The number of packets transmitted on this port since reset or manual
clear.
-
RxPkts
. The number of packets received on this port since reset or manual clear.
-
Collisions
. The number of collisions on this port since reset or manual clear.
-
Tx B/s
. The current transmission (outbound) bandwidth used on the WAN and
LAN ports.
-
Rx B/s
. The current reception (inbound) bandwidth used on the WAN and LAN
ports.
-
Up Time
. The time elapsed since this port acquired the link.
-
Poll Interval
. The interval at which the statistics are updated in this screen.
To change the polling frequency, enter a time in seconds in the Poll Interval field and click
the
Set Interval
button.
To stop the polling entirely, click the
Stop
button.
