NETGEAR R6200v2 User Manual Download Page 54

Page: 54 / 131

USB Storage

R6200v2 Smart WiFi Router

Specify Approved USB Devices

For more security, you can set up the router to share only approved USB devices.



To set up approved USB devices:

Select

ADVANCED > Advanced Setup > USB Settings

Click the

Approved Devices

button.

This screen shows the approved USB devices and the available USB devices. You can
remove or add approved USB devices.

In the Available USB Devices list, select the drive that you want to approve.

Click the

Add

button.

Select the

Allow only approved devices

check box.

Click the

Apply

button.

Your change takes effect.

If you want to work with another USB device, first click the

Safely Remove USB Device

button for the currently connected USB device. Connect the other USB device, and repeat
this process.

Summary of Contents for R6200v2




































































































































Search results

Summary of Contents for R6200v2

Reviews:

Related manuals for R6200v2

Brands by name

Popular brands

NETGEAR R6200v2, User Manual

Search results

Summary of Contents for R6200v2

Reviews:

Related manuals for R6200v2

Brands by name

Popular brands