NETGEAR Nighthawk AX8 AX6000 User Manual Download Page 80

Page: 80 / 159

Nighthawk AX8 8-Stream AX6000 WiFi Router

Manage Network Settings

User Manual

Set up Internet port aggregation on your modem.

For information about how to set up Internet port aggregation on your modem, see the

documentation that came with your modem.

Launch a web browser from a computer or mobile device that is connected to the router
network.

Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time that

you logged in. The user name and password are case-sensitive. The BASIC Home page
displays.

Select Internet.
The Internet Setup page displays.

In the WANPreference section, select the WANaggregation(1Gbps+1Gbps) radio button.

Click the Apply button.
Your settings are saved.

Connect the Internet port and Ethernet port 1on your router to two Ethernet ports on your
modem.

Summary of Contents for Nighthawk AX8 AX6000
































































































































































Search results

Summary of Contents for Nighthawk AX8 AX6000

Reviews:

Related manuals for Nighthawk AX8 AX6000

Brands by name

Popular brands

NETGEAR Nighthawk AX8 AX6000, User Manual

Search results

Summary of Contents for Nighthawk AX8 AX6000

Reviews:

Related manuals for Nighthawk AX8 AX6000

Brands by name

Popular brands