NETGEAR Nighthawk AX8 AX6000 User Manual Download Page 56

Page: 56 / 159

Nighthawk AX8 8-Stream AX6000 WiFi Router

The

Manage Network Settings

User Manual

reserved address is entered into the table.

The reserved address is not assigned until the next time the computer contacts the router’s

DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release and
renew.

Edit a reserved IP address

To edit a reserved address entry:

Launch a web browser from a computer or mobile device that is connected to the router
network.

Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time that you

logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Setup > LAN Setup. The LAN Setup page displays.

Select the radio button next to the reserved address that you want to edit.

Click the Edit button.

The Address Reservation page displays.

Change the settings.

Click the Apply button.

Your settings are saved.

Delete a reserved IP address entry

To delete a reserved address entry:

Launch a web browser from a computer or mobile device that is connected to the router
network.

Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time that you

logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Setup > LAN Setup. The LAN Setup page displays.

Summary of Contents for Nighthawk AX8 AX6000
































































































































































Search results

Summary of Contents for Nighthawk AX8 AX6000

Reviews:

Related manuals for Nighthawk AX8 AX6000

Brands by name

Popular brands

NETGEAR Nighthawk AX8 AX6000, User Manual

Search results

Summary of Contents for Nighthawk AX8 AX6000

Reviews:

Related manuals for Nighthawk AX8 AX6000

Brands by name

Popular brands