NETGEAR Nighthawk AX8 AX6000 User Manual Download Page 140

Page: 140 / 159

Nighthawk AX8 8-Stream AX6000 WiFi Router

Manage Port Forwarding and

140

User Manual

Port Triggering

The service is now in the list on the Port Forwarding/Port Triggering page.

Edit a Port Forwarding Service

To edit a port forwarding entry:

Launch a web browser from a computer or mobile device that is connected to the router
network.

Enter the router user name and password.

The user name is admin. The password is the one that you specified the first time that you

logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding

/ Port Triggering page displays.

Leave the Port Forwarding radio button selected as the service type.

In the table, select the radio button next to the service name.

Click the Edit Service button.

The Ports - Custom Services page displays.

Change the settings as needed.

Click the Apply button.

Your settings are saved.

Delete a Port Forwarding Entry

To delete a port forwarding entry:

Launch a web browser from a computer or mobile device that is connected to the router
network.

Enter the router admin user name and password.

The user name is admin. The password is the one that you specified the first time that you

logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding

/ Port Triggering page displays.

Leave the Port Forwarding radio button selected.

Summary of Contents for Nighthawk AX8 AX6000
































































































































































Search results

Summary of Contents for Nighthawk AX8 AX6000

Reviews:

Related manuals for Nighthawk AX8 AX6000

Brands by name

Popular brands

NETGEAR Nighthawk AX8 AX6000, User Manual

Search results

Summary of Contents for Nighthawk AX8 AX6000

Reviews:

Related manuals for Nighthawk AX8 AX6000

Brands by name

Popular brands