NETGEAR Nighthawk AX8 AX6000 User Manual Download Page 123

Page: 123 / 159

Nighthawk AX8 8-Stream AX6000 WiFi Router

UseDynamicDNStoAccessUSB

123

User Manual

Storage Devices Through the

Internet

Click the Create Account link.

The Create a MyNETGEAR account page displays.

Complete the fields to set up your account, and click the Create button.

You are now ready to register your router with your ReadyCLOUD account.

After you create a ReadyCLOUD account, you must register your router with your ReadyCLOUD

account.

To register your router with your ReadyCLOUD account:

Connect a USB storage device to a USB port on the router.

If your USB storage device uses a power supply, connect it.

You must use the power supply when you connect the USB storage device to the router.

When you connect the USB storage device to the router’s USB port, it might take up to two

minutes before it is ready for sharing. By default, the USB storage device is available to all
computers on your local area network (LAN).

Launch a web browser from a computer or mobile device that is connected to the network.

Enter the router user name and password.

The user name is admin. The password is the one that you specified the first time that you

logged in. The user name and password are case-sensitive.

The BASIC Home page displays.

Select ADVANCED > USB Functions > ReadySHARE Storage > ReadyCLOUD. The ReadyCLOUD

page displays.

Enter your ReadyCLOUD user name and password and click the Register button.

If you did not yet create a ReadyCLOUD account, see Create a ReadyCLOUD Account on page

135.

The router is registered with ReadyCLOUD.

Note: If the router’s Internet connection mode is set to Dial on Demand, the router

automatically changes the connection mode to AlwaysOn. This change is required for
ReadyCLOUD to remotely access the USB storage device.

After registration, visit readycloud.netgear.com.

Click the Sign In link, enter your ReadyCLOUD user name and password, and click the Sign In
button.

Summary of Contents for Nighthawk AX8 AX6000
































































































































































Search results

Summary of Contents for Nighthawk AX8 AX6000

Reviews:

Related manuals for Nighthawk AX8 AX6000

Brands by name

Popular brands

NETGEAR Nighthawk AX8 AX6000, User Manual

Search results

Summary of Contents for Nighthawk AX8 AX6000

Reviews:

Related manuals for Nighthawk AX8 AX6000

Brands by name

Popular brands