manualshive.com logo in svg

NETGEAR JWNR2000Tv3, User Manual

Share
Download
NETGEAR JWNR2000Tv3 User Manual Download Page 89

89

 N300 Wireless Router Model JWNR2000Tv3

Troubleshoot with the LEDs

After you turn on power to the router, the following sequence of events should occur:

1. 

When power is first applied, verify that the Power LED is on.

2. 

After approximately 30 seconds, verify the following:

•     

The Power LED is solid green.

•     

The Internet LED is on.

•     

A numbered LAN port LED is on for any local port that is connected to a computer. A 

lit LAN port LED indicates that a link has been established to the connected device.

The LEDs on the front panel of the router can be used for troubleshooting.

Power LED Is Off

Check the following:

•     

Make sure that the power cord is securely connected to your router and that the power 

adapter is securely connected to a functioning power outlet. 

•     

Check that you are using the 5V DC, 1A power adapter that NETGEAR supplied for this 

product.

If the error persists, you have a firmware or hardware problem. For recovery instructions or 
help with a hardware problem, contact technical support at 

www.netgear.com/support.

Internet or LAN Port LEDs Are Off

If either the Internet LED or the LAN port LEDs do not light when the Ethernet connection is 
made, check the following:

•     

Make sure that the Ethernet cable connections are secure at the router and at the modem 

or computer.

•     

Make sure that power is turned on to the connected modem or computer.

•     

Be sure that you are using the correct cable:

When connecting the router’s Internet port to a cable or DSL modem, use the cable that 
was supplied with the cable or DSL modem. This cable could be a standard 
straight-through Ethernet cable or an Ethernet crossover cable.

Wireless LED Is Off

If the Wireless LED stays off, use the NETGEAR genie to turn on the wireless radio. For more 
information, see 

Advanced Wireless Settings 

on page 65.The Wireless LED is lit when the 

wireless radio is turned on.

Summary of Contents for JWNR2000Tv3












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands