Install and Access the Modem Router and Its Network
23
N600 and AC750 WiFi DSL Modem Routers
Note:
The option for the Ethernet cable connection that is stated onscreen
applies to a cable or fiber Internet connection only (see
Set Up Your
Modem Router for Cable or Fiber Service
on page
26).
Take one of the following actions:
•
If you already power-cycled the DSL modem (see
Step
1
through
Step
7
), do the
following:
a.
Select the
None of the above
radio button.
b.
Click the
Next
button.
•
If you did not yet power-cycle the DSL modem, do the following:
a.
Unplug your DSL modem’s power, leaving the DSL modem connected to the wall
jack for your Internet service.
b.
If your DSL modem includes a battery backup, remove the battery.
c.
Wait 10 seconds.
d.
If your DSL modem includes a battery backup, reinsert the battery.
e.
Plug in your DSL modem’s power and turn on your DSL modem.
f.
Wait two minutes.
g.
Select the
I just power cycled the modem and waited for 2 minutes
radio
button.
h.
Click the
Next
button.
18.
(Only if the following screen displays) Specify how to manage problems with the detection of
the IP address for the Internet connection.
The screen that might display states that a problem occurred while detecting the Internet
connection IP address.
