manualshive.com logo in svg

NETGEAR D3600? D6000, User Manual

Share
Download
NETGEAR D3600? D6000 User Manual Download Page 153

Manage the Modem Router and Monitor the Traffic 

153

 N600 and AC750 WiFi DSL Modem Routers

b. 

Navigate to the firmware file.

The file ends in 

.bin

. An example of a firmware file name is 

D6000-V1.0.0.23_1.0.1.bin

.

c. 

Select the firmware file.

9. 

Click the 

Upload

 button.

WARNING:

To avoid the risk of corrupting the firmware, do not interrupt the 
upload. For example, do not close the browser, click a link, or load a 
new page. Do not turn off the modem router. Wait until the modem 
router finishes restarting and the Power LED turns solid green.

A progress bar shows the progress of the firmware upload process. The firmware upload 

process takes several minutes. When the upload is complete, your modem router 
restarts.

10. 

Verify that the modem router runs the new firmware version:

a.

Launch an Internet browser from a computer or WiFi device that is connected to the 
network.

b. 

Type 

http://www.routerlogin.net

.

A login screen displays.

c. 

Enter the user name and password for the modem router.

The user name is 

admin

. The default password is 

password

. The user name and 

password are case-sensitive.

d. 

Click the 

OK

 button.

The BASIC Home screen displays.

The version firmware is stated in the top right, under the 

Logout

 button.

Manage the Configuration File of the Modem Router

The configuration settings of the modem router are stored within the modem router in a 
configuration file. You can back up (save) this file to your computer or restore it.

Back Up the Settings

You can save a copy of the current configuration settings.

To back up the modem router’s configuration settings:

1. 

Launch an Internet browser from a computer or WiFi device that is connected to the 
network.

2. 

Type 

http://www.routerlogin.net

.

Summary of Contents for D3600? D6000











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands