NETGEAR D3600? D6000 User Manual Download Page 160

Page: 160 / 202

Manage the Modem Router and Monitor the Traffic

160

N600 and AC750 WiFi DSL Modem Routers

Wireless AP

Displays whether the 2.4 GHz band of the main network is enabled.

If the 2.4

GHz band is disabled but the 5 GHz band is enabled, the WiFi LED on

the front of the modem router lights green. If both radios are off, the WiFi LED is
off too.

Broadcast Name

Displays whether the 2.4 GHz band of the main network broadcasts its SSID.

Wireless Isolation

Displays whether wireless isolation is enabled for the 2.4 GHz band of the main
network.

Wi-Fi Protected Setup

Displays whether the modem router keeps its existing WiFi settings when you
use WPS to connect a device to the 2.4 GHz band of the main network:

•

Configured

. The modem router keeps its existing WiFi settings. This is the

default setting.

•

Not configured

. The modem router generates a random SSID and

passphrase and changes the security mode to WPA/WPA2-PSK mixed
mode.

BSSID

The basic set service identification (BSSID) of the 2.4 GHz band for both the
main network and guest network. The BSSID is the MAC address of the 2.4
GHz radio.

Wireless Settings (5.0GHz)

The settings of the WiFi port for the 5 GHz band of the main network. For information about how to
configure the settings of the main network, see

Manage the Basic WiFi Settings and WiFi Security of the

Main Network

on page

56,

Control the WiFi Radios

on page

73, and

Manage Advanced WiFi Features

page

76.

Name (SSID)

The WiFi network name for the 5 GHz band of the main network.

Region

The location (country).

Channel

The channel that the 5 GHz band of the main network uses.

Mode

The WiFi mode in which the 5 GHz band operates for both the main network
and the guest network.

Wireless AP

Displays whether the 5 GHz band of the main network is enabled.

If the 5

GHz band is disabled but the 2.4 GHz band is enabled, the WiFi LED on

the front of the modem router lights green. If both radios are off, the WiFi LED is
off too.

Broadcast Name

Displays whether the 5 GHz band of the main network broadcasts its SSID.

Wireless Isolation

Displays whether wireless isolation is enabled for the 5 GHz band of the main
network.

Wi-Fi Protected Setup

Displays whether the modem router keeps its existing WiFi settings when you
use WPS to connect a device to the 5 GHz band of the main network:

•

Configured

. The modem router keeps its existing WiFi settings. This is the

default setting.

•

Not configured

. The modem router generates a random SSID and

passphrase and changes the security mode to WPA/WPA2-PSK mixed
mode.

Field

Description

Summary of Contents for D3600? D6000











































































































































































































Search results

Summary of Contents for D3600? D6000

Reviews:

Brands by name

Popular brands

NETGEAR D3600? D6000, User Manual

Search results

Summary of Contents for D3600? D6000

Reviews:

Brands by name

Popular brands