manualshive.com logo in svg

NETGEAR D3600? D6000, User Manual

Share
Download
NETGEAR D3600? D6000 User Manual Download Page 10

Hardware Overview of the Modem Router 

10

N600 and AC750 WiFi DSL Modem Routers 

Top Panel with LEDs

The modem router displays status LEDs on top.

 

Figure 2. Modem router top panel with LEDs

The following table describes the LEDs from right to left and their behavior. For information 
about how to troubleshoot with the LEDs, see 

Troubleshoot with the LEDs 

on page

 

189.

Table 1.  LED descriptions

 

LED

Icon

Description

Power

• 

Solid green

. The power is on and the modem router is functioning normally.

• 

Blinking green

. The modem router is starting up, the firmware is upgrading, or 

someone pressed the 

Reset

 button.

• 

Off

. The modem router is not receiving power.

DSL

• 

Solid green

. The modem router is providing a DSL connection. In technical terms, 

the DSL port is synchronized with an ISP’s network-access device.

• 

Blinking green

. The modem router is negotiating the best possible speed on the 

DSL line.

• 

Off

. The modem router is not negotiating the speed on the DSL line and is not 

providing a DSL connection.

Internet

• 

Solid green

. The modem router is connected to the Internet.

• 

Blinking green

. The Internet port is transmitting or receiving traffic.

• 

Off

. The modem router is not connected to the Internet.

WiFi

• 

Solid green

. The modem router is providing WiFi connectivity.

• 

Blinking green

. The WiFi link is transmitting or receiving traffic.

• 

Off

. The modem router is not providing WiFi connectivity. You can still plug an 

Ethernet cable into one of the LAN ports to get wired connectivity.

Summary of Contents for D3600? D6000











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands