manualshive.com logo in svg

NETGEAR D3600? D6000, User Manual

Share
Download
NETGEAR D3600? D6000 User Manual Download Page 194

Troubleshooting 

194

N600 and AC750 WiFi DSL Modem Routers 

To reconnect if your PPPoE or PPPoA connection does not function:

1. 

Launch an Internet browser from a computer or WiFi device that is connected to the 
network.

2. 

Type 

http://www.routerlogin.net

.

A login screen displays.

3. 

Enter the user name and password for the modem router.

The user name is 

admin

. The default password is 

password

. The user name and 

password are case-sensitive.

4. 

Click the 

OK

 button.

The BASIC Home screen displays.

5. 

Select 

ADVANCED > ADVANCED Home

.

The ADVANCED Home screen displays.

6. 

In the Internet Port pane, click the 

Connection Status

 button.

The Connection Status screen displays.

7. 

Click the 

Connect

 button.

The modem router attempts to reconnect.

If you cannot connect after several minutes, you might be using an incorrect service name, 
user name, or password. Or your ISP might not be able to provide an Internet connection.

Unless you connect manually, the modem router does not authenticate using PPPoE or 
PPPoA until data is transmitted to the network.

Troubleshoot Internet Browsing

If your modem router can obtain an IP address but your computer is unable to load any web 
pages from the Internet, it might be for one of the following reasons:

•

Your computer might not recognize any DNS server addresses. 

A DNS server is a host on the Internet that translates Internet names (such as www 

addresses) to numeric IP

 

addresses. Typically your ISP provides the addresses of one or 

two DNS servers for your use. If you entered a DNS address when you set up the modem 
router, reboot your computer and verify the DNS address. Alternatively, you can configure 
your computer manually with DNS addresses, as explained in your operating system 
documentation

.

•

The modem router might not be configured as the TCP/IP router on your computer.

For information about TCP/IP problems, see 

Troubleshoot Your Network Using the Ping 

Utility 

on page

 

196.

If your computer obtains its information from the modem router by DHCP, reboot the 
computer and verify the modem router address. 

Summary of Contents for D3600? D6000











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands