Wireless Configuration
20
NETGEAR Wireless Cable Gateway
Wi-Fi Multimedia
You can use the Multimedia page to set up wireless multimedia Quality of Service (QoS).
1.
Log in to the gateway as described in
Log In to Your Gateway
on page
9.
2.
In the main menu, under Setup, select Wi-Fi Multimedia.
3.
In the
WMM Support
field, select
On
to enable WMM.
4.
In the
No-Acknowledgement
field, select
Off
or
On
to specify whether acknowledgement
(ACK) messages are used.
Usually, this field is set to
Off
. This might improve the efficiency of packet transmission. If
wireless communication quality is poor at your location (this could happen if there is a lot
of interference), set this field to
On
so that you are notified when a package is lost.
5.
To conserve battery power in smaller devices that are connected to the gateway, set the
Power Save Support field to
On
.
6.
Click Apply to save your settings.
