15.
Click the Install button.
The window displays the progress of the installation and then displays the final installation page.
16.
Click the Finish button.
17.
Unzip the configuration files that you downloaded and copy them to the folder where the VPN client is
installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at
C:\Programfiles\OpenVPN\config\ by default.
18.
For a client device with Windows, modify the VPN interface name to NETGEAR-VPN:
a.
On your computer, go to the Networks page. If you are using Windows 10, select Control Panel >
Network and Sharing Center > Change adapter settings.
b.
In the local area connection list, find the local area connection with the device name TAP-Windows
Adapter.
c.
Select the local area connection and change its name (not its device name) to NETGEAR-VPN.
If you do not change the VPN interface name, the VPN tunnel connection will fail.
For more information about using OpenVPN on your Windows computer, visit
https://openvpn.net/index.php/open-source/documentation/howto.html#quick
.
Install OpenVPN Software on Your Mac Computer
You must install this software on each Mac computer that you plan to use for VPN connections to your cable
modem router.
To install VPN client software on your Mac computer:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2.
Enter orbilogin.com.
A login window opens.
3.
Enter the admin user name and password.
Use VPN to Access Your Network
84
Orbi WiFi System
