NETGEAR CBR40 User Manual Download

Page: 99 / 101

Table 6. Factory default settings for the satellite (Continued)

Default Setting

Feature

Disabled (except traffic on port
80, the HTTP port)

Inbound (communications coming
in from the Internet)

Firewall

Enabled (all)

Outbound (communications going
out to the Internet)

Disabled

Source MAC filtering

Enabled

WiFi communication

WiFi

See satellite label

SSID name

WPA2-PSK (AES)

Security

Enabled

Broadcast SSID

Auto

Transmission speed

United States in the US

Country/region

2.4 GHz front and back haul: Auto

5 GHz front haul: Channel 48

5 GHz back haul: Channel 157

RF channel

Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network

conditions and environmental factors, including volume of network traffic, building materials and construction, and network

overhead, lower actual data throughput rate.

Technical Specifications

The following are the technical specifications for Orbi cable modem router and satellite.

Technical Specifications for Orbi Cable Modem Router

The following table shows the technical specifications for the cable modem router.

Table 7. Cable modem router specifications

Description

Feature

TCP/IP, DHCP, Dynamic DNS, and UPnP

Data and routing protocols

120V, 60 Hz, input

Power adapter

6.7 x 3.1 x 8.89 in. (170.3 x 78.9 x 225.8 mm) each

Dimensions

2.15 lb (975.2 g)

Weight

0° to 40°C (32º to 104ºF)

Operating temperature

90% maximum relative humidity, noncondensing

Operating humidity

Supplemental Information

Orbi WiFi System

Summary of Contents for CBR40






































































































Search results

Summary of Contents for CBR40

Reviews:

Related manuals for CBR40

Brands by name

Popular brands

NETGEAR CBR40, User Manual

Search results

Summary of Contents for CBR40

Reviews:

Related manuals for CBR40

Brands by name

Popular brands