NETGEAR C3700v2 User Manual Download

Page: 96 / 107

Specify Internet Port Settings

WiFi Cable Modem Router Model C3000v2 and C3700v2

In the

Service Name

field, type a descriptive service name.

In the

Service User

menu, select a user option:

•

Any

(the default) allows any computer on the Internet to use this service.

•

Single address

restricts the service to a particular computer.

Select the service type, either

TCP

UDP

TCP/UDP

(both).

If you are not sure, select

TCP/UDP

10.

In the

Triggering Port

field, enter the number of the outbound traffic port that will open the

inbound ports.

11.

In the

Connection Type

Starting Port

, and

Ending Port

fields, enter the inbound port

information.

12.

Click the

Apply

button.

The service is now in the Portmap Table. You must enable port triggering before the
modem router uses port triggering for the service that you added. For information about
port triggering, see

Specify When to Use Port Triggering

on page

96.

Specify When to Use Port Triggering



To specify when to use port triggering:

Launch a web browser from a WiFi-enabled computer or mobile device that is

connected to the network.

Type

http://routerlogin.net

http://192.168.0.1

A login window opens.

Enter the modem router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > Advanced Setup > Port Forwarding/Port Triggering

The Port Forwarding/Port Triggering page displays.

Summary of Contents for C3700v2












































































































Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands

NETGEAR C3700v2, User Manual

Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands