NETGEAR C3700v2 User Manual Download

Page: 74 / 107

Manage Your Network

WiFi Cable Modem Router Model C3000v2 and C3700v2

View WiFi Settings

Note:

Model C3000v2 broadcasts a WiFi signal in the 2.4 GHz band. Model
C3700v2 is dual-band, so it broadcasts WiFi signals in both the 2.4
GHz band and the 5 GHz band.



To view WiFi settings:

Launch a web browser from a WiFi-enabled computer or mobile device that is

connected to the network.

Type

http://routerlogin.net

http://192.168.0.1

A login window opens.

Enter the modem router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home page displays.

Click the

ADVANCED

tab.

The ADVANCED Home page displays.

The WiFi Settings (2.4 GHz) pane and the and WiFi Settings (5 GHz) pane for the
C3700v2 display the following information:

•

Name (SSID

). The WiFi network name (SSID) that the modem router uses.

•

Region

. The geographic region where the modem router is being used. It is illegal to

use the WiFi features of the modem router in some parts of the world.

•

Channel

. The operating channel of the WiFi port being used.

•

Mode

. The WiFi communication mode settings.

•

WiFi AP

. Indicates whether the modem router WiFi radio is on or off. If the WiFi radio

is turned off, the WiFi On/Off LED on the front panel is off.

•

Broadcast Name

. Indicates whether the modem router is broadcasting its SSID.

•

WiFi Isolation

. Indicates if WiFi isolation is enabled. When WiFi isolation is enabled,

WiFi clients can connect to the Internet, but cannot access each other or access
Ethernet devices on the network.

•

Wi-Fi Protected Setup

. Indicates whether Wi-Fi Protected Setup is configured for

this network.

Summary of Contents for C3700v2












































































































Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands

NETGEAR C3700v2, User Manual

Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands