NETGEAR C3700v2 User Manual Download

Page: 73 / 107

Manage Your Network

WiFi Cable Modem Router Model C3000v2 and C3700v2

Click the

ADVANCED

tab.

The ADVANCED Home page displays.

The Cable Information pane displays the following information:

•

Hardware Version

. The modem router model.

•

Firmware Version

. The version of the modem router firmware.

•

Cable Modem Serial Number

. The serial number of the cable modem.

•

CM Certificate

. The status of the cable modem certificate. If Not installed displays as

the status, contact your Internet service provider.

•

CM MAC

. The MAC address of the cable modem.

•

LAN Port

. The MAC address of LAN port 1. The following information also displays:

MAC Address

. The Media Access Control address. This address is the unique

physical address that the Ethernet (LAN) port of the modem router uses.

IP Address

. The IP address that the Ethernet (LAN) port of the modem router

uses. The default is 192.168.0.1.

DHCP Server

. Identifies whether the built-in DHCP server of the modem router is

active for the LAN-attached devices.

For information about using the

Reboot

button, see

Reboot the Modem Router

on page

75.

View Internet Port Information



To view modem router Internet port information:

Launch a web browser from a WiFi-enabled computer or mobile device that is

connected to the network.

Type

http://routerlogin.net

http://192.168.0.1

A login window opens.

Enter the modem router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home page displays.

Click the

ADVANCED

tab.

The ADVANCED Home page displays.

The Internet Port pane displays these WAN Internet port settings:

•

MAC Address

. The MAC address of the WAN Internet port.

•

IP Address/Mask

. The IP address of the WAN Internet port.

•

Connection

. The type of WAN Internet port connection.

•

Default Gateway

. The IP address of the default gateway.

•

Domain Name Server

. The IP address of the Domain Name Server.

Summary of Contents for C3700v2












































































































Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands

NETGEAR C3700v2, User Manual

Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands