NETGEAR C3700v2 User Manual Download

Page: 46 / 107

Share a USB Storage Device Attached to the Modem Router

WiFi Cable Modem Router Model C3000v2 and C3700v2

Edit a Network Folder on a USB Storage Device

You can edit network folders on a USB storage device connected to the modem router USB
port.



To edit a network folder:

Launch a web browser from a WiFi-enabled computer or mobile device that is

connected to the network.

Type

http://routerlogin.net

http://192.168.0.1

A login window opens.

Enter the modem router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home page displays.

Select

ADVANCED > ReadySHARE

The USB Storage (Advanced Settings) page displays.

Click the

Edit

button.

The Edit Network Folder window opens.

Change the settings in the fields as needed.

Click the

Apply

button.

Your settings are saved.

Approve USB Storage Devices

For more security, you can set up the modem router to share only USB storage devices that
you approve.



To approve USB devices:

Launch a web browser from a WiFi-enabled computer or mobile device that is

connected to the network.

Type

http://routerlogin.net

http://192.168.0.1

A login window opens.

Enter the modem router user name and password.

The user name is

admin

. The default password is

password

. The user name and

password are case-sensitive.

The BASIC Home page displays.

Summary of Contents for C3700v2












































































































Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands

NETGEAR C3700v2, User Manual

Search results

Summary of Contents for C3700v2

Reviews:

Related manuals for C3700v2

Brands by name

Popular brands