NETGEAR C3700v2 User Manual Download | Manualshive

Page: 64 / 107

background image

Specify Network Settings

64

WiFi Cable Modem Router Model C3000v2 and C3700v2

7.

Select a security option.

The WPA2 options use the newest standard for the strongest security, but some older
computers and WiFi devices cannot use it. We recommend that you select the

WPA-PSK

[TKIP] + WPA2-PSK [AES]

radio button. This setting protects your WiFi network and lets

computers and WiFi devices connect to the WiFi network by using either WPA2 or WPA
security.

8.

Click the

Apply

button.

Your settings are saved.

Control the WiFi Radios

The modem router internal WiFi radios broadcasts signals in the 2.4 GHz range. The
C3700v2 modem router also broadcasts in the 5 GHz range. By default, these radios are on
so that you can use WiFi to connect to the modem router. When the WiFi radios are off, you
can still use an Ethernet cable for a LAN connection to the modem router.

You can turn the WiFi radios on and off with the

WiFi On/Off

button on the modem router, or

you can log in to the modem router and enable or disable the WiFi radios. If you are close to
the modem router, it might be easier to press its

WiFi On/Off

button. If you are away from the

modem router or you already logged in, it might be easier to enable or disable the radios.

Use the WiFi On/Off Button



To turn the WiFi radio off and on with the WiFi On/Off button:

Press the

WiFi On/Off

button on the modem router for two seconds.

If you turned off the WiFi radio, the WiFi On/Off LED and the WPS LED turn off. If you
turned on the WiFi radio, the WiFi On/Off LED and the WPS LED light.

Enable or Disable the WiFi Radios

If you used the

WiFi On/Off

button to turn off the WiFi radios, you can’t log in to the modem

router to turn them back on. You must press the

WiFi On/Off

button again for two seconds to

turn the WiFi radios back on.



To enable or disable the WiFi radios:

1.

Launch a web browser from a WiFi-enabled computer or mobile device that is

connected to the network.

2.

Type

http://routerlogin.net

or

http://192.168.0.1

.

A login window opens.

3.

Enter the modem router user name and password.

«
...
62
63
64
65
66
...
»

Summary of Contents for C3700v2












































































































Reviews:

No comments

Related manuals for C3700v2

Brand: C-motech Pages: 11

Brand: Kcell Pages: 20

Brand: FALCOM Pages: 46

Brand: Ebyte Pages: 18

Brand: Ebyte Pages: 18

Brand: Ebyte Pages: 18

Brand: Ebyte Pages: 24

Brand: Medion Pages: 2

Verizon LT1000 2G

Brand: Connected IO Pages: 6

Brand: Comnet Pages: 5

Brand: Vololink Pages: 50

Brand: H3 System Pages: 15

Brand: Hamlet Pages: 37

Brand: FBS Pages: 6

Brand: Paradyne Pages: 120

Brand: ZIV Pages: 39

Brand: Omega Pages: 8

Brand: netsys Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands