4.
Select IP Address (DHCP On).
The button in the DHCP section displays blue because the DHCP client of the switch is enabled.
5.
Click the button in the DHCP section.
The button displays white, indicating that the DHCP client of the switch is disabled, and the IP address
fields become editable.
6.
Enter the fixed (static) IP address that you want to assign to the switch and the associated subnet mask
and gateway IP address.
You can also either leave the address in the IP Address field as it is (with the IP address that was
issued by the DHCP server) or change the last three digits of the IP address to an unused IP address.
7.
Write down the complete fixed IP address.
You can bookmark it later.
8.
Click the APPLY button.
Your settings are saved. Your switch web session is disconnected when you change the IP address.
9.
If the login page does not display, in the address field of your web browser, enter the new IP address
of the switch.
The login page displays.
10.
For easy access to the management interface, bookmark the page on your computer.
Install and Access the Switch in Your Network
15
Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)
