background image

Command with FXS Gateway 

 

- 179 - 

as 12345678 [sysconf –usrdefprefix 12345678]. While user would like to dial other 

numbers, he can dial a defined digit – [*] to disable the function 

[sysconf –prefixdisab *], then dial to the number he wants to dial. 

-codec: Set who is the one to determine voice codec during negotiation. 0 is caller will 

determine the codec, and 1 is mater will determine the codec. (During 

negotiation 2 endpoints will compare gateway type level to determine who is 

master.) 

-localrbt: Enable or Disable locally generate ring back tone. Disable means gateway 

will receive ring back tone from remote callee, Enable means gateway will 

generate ring back tone locally. 

-gwprefix: Drop or keep gateway prefix . Keep Means when gateway has incoming call 

from IP side, it will not drop prefix before searching for call number. Drop 

Means when gateway has incoming call from IP side, it will drop prefix before 

searching for called number. 

-eod: It will transfer the DTMF in [#] if users disable the end of dial function. Users 

have to press the keypad in [#] if the end of dial function is enable. 

Note: 

User can also define IP address here in P2P mode, once user press “#”, 

Gateway will call out this IP address. 

Summary of Contents for 1AFXS
























































































































































































































































Reviews: