Command with FXS Gateway
- 135 -
Users can refer to [pbook] command for more information.
usr/config$ pbook –add name TEST1 ip 192.168.1.20 e164 20
Memo:
The command is to add a record onto PhoneBook. After the command
completed, you can type [pbook –print] to see if the input record is correct.
Step 3.
Ather the configuration [commit] and [reboot] the device.
usr/config$ commit
usr/config$ reboot
24.4.3 Hotline Mode
The Hotline Mode is applied in limited two peers. User just picks up the phone set
and then hears ring back tone or dial tone depended on configurations of destination
device.
¾
Gatekeeper Mode
Step 1. Set gateway under Gatekeeper mode.
Step 2. Create a Hotline table with [line] command.
Usr/config$ line –config 1 hotline 1001
In this example means: if user picks up phone set of FXS Line1, gateway will
automatically dial out [1001].
Summary of Contents for 1AFXS
