NETEX NESiGate-CO Reference Manual Download Page 42

Page: 42 / 49

emsg(xx,yyyy): unknown netex request 0xn

Description:

An unknown Netex request was received by the NESiGate-CO application.

xx,yyy

-- identifies the NESiGate-CO process

0xn

-- n identifies the unknown request type

User Response:

None. Netex reports the condition and continues.

emsg(xx,yyyy): abort ind received, disconnecting

Description:

An abort indicator was received by the NESiGate-CO application.

xx,yyy

- identifies the NESiGate-CO process

User Response:

None. Netex reports the condition and continues.

chnlMailHandler(stream nnnnnnnn(xx)): system reset, subch=nn

Description:

A system reset was received on the channel

xx,

- identifies the NESiGate-CO channel interface name

- identifies the NESiGate-CO subchannel device

User Response:

None. Netex reports the condition and continues.

MAN-REF-COSW 2.10-19

Appendix C

Page

Summary of Contents for NESiGate-CO


















































Search results

Summary of Contents for NESiGate-CO

Reviews:

Related manuals for NESiGate-CO

Brands by name

Popular brands

NETEX NESiGate-CO, Reference Manual

Search results

Summary of Contents for NESiGate-CO

Reviews:

Related manuals for NESiGate-CO

Brands by name

Popular brands