NETEX: transport protocol error n
Description:
A netex transport protocol error has been detected. The specific error is identified by “n”
1
-- base field too small
2
-- protocol level is not greater than or equal to 2
3
-- invalid message type
4
-- connect attempt to unlicensed PROT_4
5
-- tdb->tdblrn > tub->tubrplrn
6
-- ‘disc’ sub-field in ‘x’ msg type, ‘type’
7
-- invalid sub-field type ‘x’, ‘type’
8
-- sub-field ‘x’ too small = ‘y’, ‘type’, ‘size’
9
-- sub-field ‘x’ length ‘y’ overlaps total transport length ‘z’, ‘type’, ‘size’, ‘length’
10
-- New path has smaller segsize
User Response:
None. Netex reports the invalid message and continues.
Message received with no read active
Description:
A Netex message was received on the network, but there was no Netex ‘read’ request ac-
tive at the time. Message is dropped.
User Response:
None. Netex reports the condition and continues.
Repeated occurences of this message could indicate the Netex ‘DREADQUEUE’ parameter might
need to be increased.
Page
34
Appendix C
MAN-REF-COSW 2.10-19
