NETEX NESiGate-CO Reference Manual Download Page 43

Page: 43 / 49

Page

Appendix C

MAN-REF-COSW 2.10-19

chnlMailHandler(stream nnnnnnnn(xx)): selective reset, subch=nn

Description:

A selective reset was received on the channel

xx,

- identifies the NESiGate-CO channel interface name

- identifies the NESiGate-CO subchannel device

User Response:

None. Netex reports the condition and continues.

chnlMailHandler(stream nnnnnnnn(xx)): data timeout, subch=nn

Description:

A data timeout has occurred on the indicated subchannel device. Data is discarded and

the Netex session is aborted.

xx,

- identifies the NESiGate-CO channel interface name

- identifies the NESiGate-CO subchannel device

User Response:

None. Netex reports the condition and continues.

chnlGenAbortInd(stream nnnnnnnn(xx)): putnext message nnnnnnnn

Description:

xx,

-- identifies the NESiGate-CO channel interface name

nnnnnnn -

User Response:

None. Netex reports the condition and continues.

Summary of Contents for NESiGate-CO


















































Search results

Summary of Contents for NESiGate-CO

Reviews:

Related manuals for NESiGate-CO

Brands by name

Popular brands

NETEX NESiGate-CO, Reference Manual

Search results

Summary of Contents for NESiGate-CO

Reviews:

Related manuals for NESiGate-CO

Brands by name

Popular brands