Show Channel Info
This displays detailed channel interface information. Prior to selecting this button, provide the following
data on the selection screen:
IFname
The name of the channel interface to display. If not specified, all defined chan-
nel interfaces are displayed.
Device#
Limit the display of the channel interface to a particular device. For an ESCON
channel interface running in “configured” mode, this parameter is the Device
Index. For an ESCON channel interface running in “non-configured” mode,,
this parameter is an offset from the UADD specification. If the UADD parame-
ter is not used, this parameter is an offset from the low-order byte of the start-
GNA address.
Show Info [ x3650 - Thu Jun 3 15:51:07 ]
id minor state db type prot startGna #Su sUnt sdi TxMsgs
RxMsgs
-------- ----- -------- -- ---- ---- -------- --- ---- --- -------- ------
--
if5e00 1 STARTED 0 MSG HCM 00005e00 4 -1 1 0
0
id sub unit devi initStat accWSize currWMsg
------------ --- ---- ---- -------- -------- --------
if5e00:1 0 -1 1 0 0 0
Figure 3. Output from ‘Show Channel Config’
Channel Display Stats
This displays statistics for a particular channel interface. Prior to selecting this button, provide the fol-
lowing data on the selection screen:
IFname
The name of the channel interface to display. If not specified, all defined chan-
nel interfaces are displayed.
Device#
Limit the display of the channel statistics to a particular device. For an ESCON
channel interface running in “configured” mode, this parameter is the Device
Index. For an ESCON channel interface running in “non-configured” mode,
this parameter is an offset from the UADD specification. If the UADD parame-
ter is not used, this parameter is an offset from the low-order byte of the start-
GNA address.
MAN-REF-COSW 2.10-19
Web Browser Interface
Page
13
