User’s Manual
Wireless Serial Server GW5120
Copyright © 2009 Neteon Technologies, Inc.
All rights reserved.
33
6.2.3. SNMP Settings
Operation: [Main]
Æ
[2 Networking]
Æ
[3 SNMP Settings]
Select
SNMP Settings
by press “
3
”
Networking page:
” to enter
SNMP Settings page.
SNMP can
be enable/disable, and network identification can be also set on
SNMP Settings page.
The
changes will not become effective until GW5120 is restarted
GW5120 supports get/set SNMP parameters, which are
SysName
(System Name),
SysLocation
(System Location) and
SysContact
(System Contact). These will response and supply basic
system information from standard SNMP query. SNMP system parameters set by enter the
corresponding menus and values. For example,
enter 2
for changing the
SysName
then enter the
desired name.
Fig 44. SNMP Settings by Telnet
6.3. Wireless Configuration
Operation: [Main]
Æ
[3 Wireless Settings]
Select Wireless Settings by press “
3
” on Main Menu; the following screen shall appear (
Fig. 45
).
IP,
Netmask,
Gateway
,
IP
mode
, and
Region
can be set
by enter the corresponding menu and
corresponding values.
Fig 45. Configure Wireless Settings by Telnet
