PC Quick Link Software
To store the results in a PC using Quick Link or PC wedge or
other communications software follow these steps:
1. Using the line setting option select: Baud
Rate=9600, Data Bits=8, Parity=None, Stop
Bits=1.
2.
Connect the RS232 cable from the EXPMT
2000 to the serial port of the PC (DB-9
connector) and in the Modem setup option
of Quick Link select the COM port.
1
Select the file option to Receive File.
2
Æ
”ASCII” and enter a file name to which the EXPMT 2000
results are to be stored.
3 Once the above selections have been made press ‘PRI’ in
the main menu of the EXPMT 2000 and press the PC ‘F2
‘key for the results to be stored in the given file name.
4 The file can be printed out or edited using any text editor.
5
Press the PrH ‘F3’ key to print a header.
6
Press the NO ‘F4’ key to return to the Level 3 Menu
.
Note: Additional Printer Function instructions are being
revised and will be supplied later.
2.10 Auxiliary Functions
The EXPMT 2000 has four Auxiliary Operating Functions – Test,
Calibration, Print Format, Pacemaker Battery Test.
Press the Aux ‘F4’ key in the Level 3 Main Pacer Menu.
< - P a c e r
T e s t
- >
T Y p e
A u t
P r i
A u x
F1 F2 F3 F4
Auxiliary Functions
A u x
F u n c
t
i
o n s
T
s t
C a
l
P r
F S
B a
t
EXPMT 2000 User Manual
24
