P a g e
|
14
Clock Setup
The Analyzer has a real time clock. The clock is setup at the
factory. The test results saved under the Equipment ID set
along with date and time. Therefore it is important to reset the
time clock to the region where the unit is used. The time, date,
month and year can be set individually from the ‘CONFG’)
menu.
To reset the time follow the steps:- (Time is set in the order
Hour, Minute, Second)
•
From the main Menu press F4 (‘CONFG’)
•
From The ‘Configuration Menu’ press F1 (‘TIME’) to set
Hour, Minute and Seconds.
•
Use F1 or F2 to set the hour.
•
Press F4 (‘NEXT’) to change the minute. Use F1 or F2
to set the minute.
•
Pres F4 for setting the seconds. When done press
“ESC” key to the ‘Configuration Menu’.
To reset the Month, Date and Year follow the steps:- (The
sequence is Month, Date and Year)
•
From the ‘Configuration Menu’ press F4 (‘DATE’. Use
F1 or F2 to change the month displayed.
•
Press F4 (‘NEXT’) to set the Date. Use F1 or F2 to
change the Year.
•
Press F4 (‘NEXT’) to set the Year. Use F1 or F2 to
change the Year.
•
When done press ‘ESC’ twice to the main Menu.
Summary of Contents for Delta 3300
Page 38: ...P a g e 35...
