P a g e
|
13
Defibrillator Testing
Introduction
The Delta 3300 can be turned ON by sliding the ON/OFF switch
located on the right side panel. When the unit is first powered,
the screen momentarily shows the software version and the
build number then will display the Main Menu as shown below.
In this menu the user can input a 4 digit Equipment ID of the
unit under test (DUT). The test results that are saved will be
designated under this unique ID and available for uploading to a
PC and print. Therefore it is very important to change the ID
when a new unit is being tested.
Equipment ID
Press F1 for the equipment ID set menu. Use F1, F2, F3, F4 to
toggle the digits from 0-9. When done press the “SAVE” key.
The Equipment ID is now saved and will be displayed in the
main menu.
To change the ID go back to the previous step.
Defibrillator Test Menu
Summary of Contents for Delta 3300
Page 38: ...P a g e 35...
