NetComm V300 User Manual Download Page 64

Page: 64 / 68

V300 VoIP Telephone Adaptor/Router

YML768 Rev1

PPPoE

Point-to-Point Protocol over Ethernet. A method for establishing

sessions and encapsulating PPP packets over an Ethernet, speciﬁed

by RFC 2516.

PPTP

Point-to-Point Tunneling Protocol. An extension of Point-to-Point

Protocol used to create virtual private networks between PCs.

Protocol

A set of rules that govern the transmission of data between

interconnected devices to maintain or improve communication.

Proxy server

Provides a list of items available on other servers to increase the

availability and speed of retrieving that information.

PSTN

Public Switched Telephone Network. The standard telephone

network.

QoS

Quality of Service. The expected data loss or latency.

Remote access

Communication from a remote location or facility through a data

link.

Remote digital loopback test

This test loops the remote digital receiver output back into

the transmitter input.

Remote host

The computer receiving the network commands.

RFC

Request for Comments. Documents published by the Internet

Engineering Task Force pertaining to Internet protocols and policies.

RIP

Routing Information Protocol. The protocol governing the exchange

of routing information.

RJ11

A 6-position jack used with dial networks and telephone sets.

RJ45

An 8-position jack used with programmable dial networks.

Router

Protocol-dependent device that connects subnets together. Routers

operate at the network layer (layer 3) of the ISO Open Systems

Interconnection--Reference Model.

Routing table

A table that lists routing paths to enable a node to route trafﬁc to

another node in the network.

RS-232

A low-speed, 25-position, DCE/DTE interface.

Server

Hardware or software that offers a speciﬁc service, such as database

management, to a client.

SIP

Session Initiation Protocol, a signaling protocol for Internet

conferencing/telephony.

Static route

A route that is permanent rather than a route that is dynamically

assigned by another router.

STP

Shielded Twisted Pair. Telephone wire that is wrapped in a sheath to

eliminate external interference.

Summary of Contents for V300





































































Search results

Summary of Contents for V300

Reviews:

Related manuals for V300

Brands by name

Popular brands

NetComm V300, User Manual

Search results

Summary of Contents for V300

Reviews:

Related manuals for V300

Brands by name

Popular brands