NetComm V300 User Manual Download Page 32

Page: 32 / 68

V300 VoIP Telephone Adaptor/Router

YML768 Rev1

Field

Description

Confirm Password

Repeat the password

Expire

Duration of interval for SIP keep alive registration.

Default 60.

QValue

The priority assigned to the V300 to register on the

SIP server of your VoIP service provider. The value

must be between 0 and 1, with 1 having the highest

priority. Default 0.8.

RTP packet interval

Duration (frequency) of the V300 sending

compressed voice data packet. There are two options

for this setting 20ms and 40ms. In some cases, a

40ms interval can save your broadband upstream

bandwidth comparable to a 20ms interval. For the

best value for this setting, please consult your VoIP

service provider.

Codec

G.729 is the highest compression codec which

only occupies 8kbits/sec. PCMA (G.711 alaw) and

PCMU (G.711 ulaw) quire 64kbits/sec. We highly

recommended you to use G.729. Default G.729.

DTMF

In-band or RFC 2833. Default in-band

Payload Type

It indicates which RTP packets contain DTMF

information in normal RTP stream.

MaxDigist

The maximum number of digits (numbers) you can

dial using the V300. Default 24.

MaxRings

The number of rings before an incoming call is

answered. Maximum 24. Default 15.

Port No

The port on the host used to communicate with the

SIP server or remote end. This port can be changed.

Default 5060.

UseProxy

In order to use the V300 with a VoIP service provider

you will need to specify a Proxy server which the

V300 communicates with. Choose Yes and enter

the details under the Proxy/Register and Domain

sections. Choose No if you want to use the V300 in

Peer-to-Peer mode.

Proxy/Register

Host Address/URL:

IP address of the SIP proxy server.

Port No:

Port number of the SIP-Proxy server, at which it

listens to your VoIP signalling messages. Default

5060.

Summary of Contents for V300





































































Search results

Summary of Contents for V300

Reviews:

Related manuals for V300

Brands by name

Popular brands

NetComm V300, User Manual

Search results

Summary of Contents for V300

Reviews:

Related manuals for V300

Brands by name

Popular brands