NetComm V300 User Manual Download Page 33

Page: 33 / 68

V300 VoIP Telephone Adaptor/Router

YML768 Rev1

Field

Description

Domain

Domain Address:

Domain name of the SIP Registrar server.

Enter or select the required information and then click on the

Apply

button to submit the

settings. The system status window will be opened.

The SIP registration status is displayed in the top-right hand corner. It will take a while to

complete the registration process. Use the Refresh button on your web browser to check the

registration status.

Field

Description

Register Status:

There are three instances as explained in the

following:

DIRECT_CALL

will be displayed all the time if you

choose non-UseProxy mode.

No Register

will be displayed if you conﬁgure the

V300 in UseProxy mode, but fail to register.

Registered Success

will be displayed if you choose

UseProxy mode and registered successfully.

VoIP Phone number, Client, Proxy/Register/Domain, WAN and STUN display their related

information.

Summary of Contents for V300





































































Search results

Summary of Contents for V300

Reviews:

Related manuals for V300

Brands by name

Popular brands

NetComm V300, User Manual

Search results

Summary of Contents for V300

Reviews:

Related manuals for V300

Brands by name

Popular brands