4
HS1100N Quick Start Guide
YML-QSG-HS
Top Panel
The following indicator lights (LEDs) provide a quick way to check the current status of the HS1100N.
Icon
Item
Description
Power
LED on – Power is being supplied to the HS1100N
LED off – The HS1100N is not powered on
WAN
LED on – The HS1100N is connected via the WAN port
LED flashing – Data is being transmitted through the WAN port
LED off – The HS1100N has no connection via the WAN port
/
LAN1 /
LAN2
LED on – The HS1100N is connected via the LAN port
LED flashing – Data is being transmitted through the LAN port
LED off – The HS1100N has no connection via the LAN port
WLAN
LED on – The HS1100N is broadcasting wirelessly
LED off – The HS1100N is not broadcasting wirelessly
Internet
LED on – The HS1100N is currently able to access the Internet
LED off – The HS1100N is not able to access the Internet
(The detection interval is 1 minute. Therefore this reflects the connection status within
the last minute)
Indicates the current WES (WDS Easy Setup) status during WES setup:
WES
Master
Slave
WES Start
LED Blinks Slowly
LED blinks quickly
WES Negotiate
LED Blinks Slowly
LED blinks quickly
WES Fail (Negotiate Timeout)
LED off
LED off
WES Success
LED on for over 5 seconds
LED on for over 5
seconds (after master
displays ‘WES Success’)
USB
Reserved for future use.
