User Guide
T1/E1 configuration guide
43
2) Clock Source Setting
Refer to the above article ‘
2. Timing Clock mode Setup
’ and set clock mode.
3) Trunk Type Setting
Set a trunk type fit for digital trunk to interoperate with.
4) Signaling Type Setting
Set signaling type needed for interoperability test.
5) Line Coding and Frame Mode Setting
Set line coding and frame mode respectively fit for the trunk type and signaling type as
set in the above step of 3) and 4).
6) Channel Type Setting
Set each voice channel type.
Each voice channel may be set to ‘
incoming
’, ‘
outgoing
’, or ‘
bothway
’.
- Incoming : Receiving call is only available.
- Outgoing : Sending call is only available.
- Bothway : Both receiving and sending call are available.
7) Signaling-related Parameter Setting
Adjust parameters of directory corresponding to signaling type set in the above step of 4).
8) Saving Setting Value
Save setting values to apply changed values even after rebooting system.
The command for saving can be executed in the directory of ‘MAX:/CONFIG>‘.
9) Reset
Reset the system to apply the above changed.
