37
SafeGuard Controller User Manual
MAN-0115 Rev 0
6.2 SAFEGUARD N4 NEMA 4X WALL MOUNT FIBERGLASS ENCLOSURE
The SafeGuard N4 shown in Figure 6.2 is a fiberglass NEMA 4X wall mount enclosure.
Seven, 8 channel I/O option PCB’s, such as analog input or discrete relays, may be
mounted inside this enclosure. Refer to section 3 for information on each option PCB.
The enclosure may be mounted outdoors with a weather deflector shield. It weighs
approximately 17 pounds. Figure 6.3 provides important warning information
concerning correct grounding procedures for non-metallic enclosures. Conduit entries are
not provided so installers may place entries as needed. Bottom or lower side areas are
recommended. Care must be taken to avoid drilling into circuit boards mounted inside
the enclosure. Properly ground the enclosure and follow national and local electrical
codes.
Figure 6.2
