20
SafeGuard Controller User Manual
MAN-0115 Rev 0
Figure 2.15
2.4 AUTHORIZATION MODE
A password entered in the
AUTHORIZATION
menu allows locking all menus.
Viewing
menus is not denied but attempts to
edit
variables flashes the
Locked
message on the
LCD.
Authorized individuals locking the system should first enter a name, phone #, or other
contact information into the 10 digit field. To lock or unlock the system the correct 4
digit authorization number must be entered into the
Enter Code
field. Point to the
Unlock System
menu entry and press
EDIT
to complete the unlock procedure.
It is very important to record the 4 digit code. However, if lost it may be displayed
briefly at power up using the following procedure:
Remove power from the SafeGuard Controller. Reapply power and as the alarm LED's
begin scrolling down, hold the following keys simultaneously "UP", "DOWN", "NEXT",
& "EDIT". Watch closely. The 4-digit authorization code appears briefly at bottom left
of the screen.
IMPORTANT!
DO NOT hold the keys before applying power since this causes a cold
boot and returns all settings back to factory defaults.
A u t h o r i z a t i o n
E N T E R N A ME
E n t e r C o d e
L o c k S y s t e m
# # # #
Figure 2.16
2.5 LCD CONTRAST ADJUSTMENT
The Setup menu item identified as
CONTRAST
allows users to adjust the LCD contrast
to a level suitable to the ambient lighting. Selecting
CONTRAST
and pressing
EDIT
causes the
UP/DOWN
keys to increase and decrease LCD contrast.
