36
SafeGuard Controller User Manual
MAN-0115 Rev 0
SECTION 6
6.1 SAFEGUARD PM PANEL / RACK MOUNT ENCLOSURE
The SafeGuard Panel Mount shown in Figure 6.1 is a half width 19” rack enclosure. It is
supplied with hardware that allows mounting in either a full width 19” rack style cabinet
or it may be panel mounted in a rectangular cutout. Only two 8 channel I/O option
PCB’s such as analog input or discrete relays may be mounted directly to the back of the
enclosure. Refer to section 3 for information on each option PCB.
Additional 8 channel I/O option PCB’s must be located external from the assembly on
another mounting plate. A 3 foot length of I
2
C cable is also supplied for this purpose.
Weight is approximately 7 pounds. Properly ground the enclosure and follow national
and local electrical codes.
RACK / PANEL MOUNT
(19” RACK SPREADER PLATES &
PANEL MOUNT BEZAL NOT SHOWN)
10.60
9.10
FRONT VIEW
5.22
SIDE VIEW
9.60
Note: Panel cut-out = 5.25 X 9.20
Figure 6.1
Rack Panel Mount Part # SG10-0208
