Net DVR DVR7004, User Manual, Page: 63 / 83

63
Net DVR
4.9.4 Restore Default
The way to restore default setting: After login, through
“
System Management
”
->
“
Default
”
continuous operations to enter the interface, the
interface is as follows:
Note: Network IP and port, System time, user account and hard disk management wouldn
’
t be restore default when do this operation.System
default parameters:
Common Para.:Contrast(5:1),Video format (PAL);Record overwrite mode(Auto cycle);Disk error alert(Enabled);Open auto locking(Enabled),auto
Disk format: System supports only FAT32 format, the capacity of the HDD is above 32G.System supports only one partition for backup.
Format: Select the HDD NO., then focus on the
“
format
”
icon and press
“
OK
”
to choose the type of the partition (DATA or BACKUP ). The
interface is as follows, after you confirmed the partition type, press
“
OK
”
, the system will prompt
“
It
’
s formatting...
”
.
lock time 3 minutes;Date format(YYYY-MM-DD);Display channel
name (Enabled);Display time(Enabled);Display temperature(Enabled);
Channel switch(Closed).
Rec. Para.:Record mode(All);Encoding stream type(VBR);Encoding
stream(512K);Record quality(High);Video frame(25);Audio(Enabled);
Transmission encoding stream(512K);Transmission record quality(High);
Transmission audio(enabled).
Record Mode:Manual(Closed);Schedule(Closed);Motion detection
(Closed);Alarm detection(Closed).
Network:Auto redial(Closed);Auto login(Closed).
COM:Baudrate(9600);Data bit(8);Parity bit(None);Stop bit(1);Keyboard
address(1);Protocol(Unknown).
Channel:Channel name(Reset to default);Video loss alarm(Enabled);