Ness HD-960H User Manual Download Page 86

Page: 86 / 161



HDD Status

HDD is not connected and cannot be added.

HDD is connected.

HDD is not connected currently but can be added.

An error occurred in HDD.



Camera Status

Camera is in covert mode.

Camera is connected.

Camera is not connected currently but can be added.

Camera is not connected and cannot be added.



Recording Data Status

The channel is not being recorded because it’s not supported.

The channel is being recorded.

The channel is not being recorded currently but can be recorded later.



Motion Status

Motion is not activated and supported.

Motion is being activated.

Motion is not activated but can be activated later.



Alarm In Status

Alarm In is not activated and cannot be added.

Alarm In is being activated.

Alarm In is not activated currently but can be added later.



Alarm Out Status

Alarm Out is not activated and cannot be added.

Alarm Out is being activated.

Alarm Out is not being activated but can be added later.



Relay Out Status

Relay Out is not activated and cannot be added.

Relay Out is being activated.

Relay Out is not being activated but can be added later.

Summary of Contents for HD-960H


































































































































































Search results

Summary of Contents for HD-960H

Reviews:

Related manuals for HD-960H

Brands by name

Popular brands

Ness HD-960H, User Manual

Search results

Summary of Contents for HD-960H

Reviews:

Related manuals for HD-960H

Brands by name

Popular brands