Ness HD-960H User Manual Download Page 110

Page: 110 / 161



Please choose one of the devices to playback from the Server List and right Click on the mouse to have popup menu with

Connect.



Select Date

In calendar, dates with recorded data are marked in red.



Select the date among the dates marked in red.



Select Time

Please select the time that users want to playback by Clicking

▲

▼

buttons on the right-hand side to adjust the time or

drag the Time Select Bar with mouse.

Fast Forward/Backward & Playback
(Click the button to increase the speed by x1, x2, x4, x8, x16, x32, x64 and Extreme)

2 Sequence

Mode

Display Mode (Click the button to divide the screen by 1, 4, 9, 16 and Full)

Time Bar (24 Hour)

5 Data

Bar

(Recorded

data)

6 Time

Select

Bar



When Date/Time search is completed, please Click Playback control button to begin playback.

7.6.2 Event Search



The Event button allows users to search event recorded data of DVR.



To start the event search, please Click

‘EVENT’

and users will see the following screen.

Search previous ‘Year’

Search next ‘Year’

Search previous ‘Month’

Search next ‘Month’

①

②

③

④

⑥

⑤

①

②

③

Summary of Contents for HD-960H


































































































































































Search results

Summary of Contents for HD-960H

Reviews:

Related manuals for HD-960H

Brands by name

Popular brands

Ness HD-960H, User Manual

Search results

Summary of Contents for HD-960H

Reviews:

Related manuals for HD-960H

Brands by name

Popular brands