Ness HD-960H, User Manual

Page: 39 / 161

CAUTION
DUE TO THE VARIOUS LOCAL JUNK MAIL POLICIES, EMAILING MAY NOT WORK PROPERLY. SSL EMAIL SERVERS MAY ALSO
NOT WORK CORRECTLY. IF SO PLEASE DEACTIVATE THE SSL FEATURE IN THE (YOUR) SERVER SETUP. NOTE THAT SOME
SERVER CANNOT DEACTIVATE THIS FEATURE
Port

The Port Number Setup menu allows users to configure Command, Stream and web port, when connecting to network users.
 Port number
-
Command: 5000~65535 (Default: 5920)
-
Stream: 5000~65535 (Default: 5921)
-
Web: 1~65535 (Default: 80)
CAUTION
IT IS NOT POSSIBLE TO CHANGE PORT NUMBER, WHEN THE DVR IS CONNECTING TO NETWORK.
ONCE PORT NUMBERS ARE CHANGED, IT MUST BE ALSO CHANGED THE PORT NUMBERS ON REMOTE SOFTWARE SUCH AS
CMS Pro, mViewer Pro and iCMS.
Dual Streaming
 To change Frame rate and qualities of dual streaming, uncheck from the checkbox next to Default Value.
-
Frames : 1, 3, 5, 7, 15 frames for NTSC (1, 3, 5, 6, 12.5 frames for PAL)
-
Qualities : Low, Standard, High, Super
NOTE
Default Frame rate and Quality are 15 and High
.
NOTE
Dual Streaming mode may reduce network traffic and then show display more smooth at the low speed network environment.
 DDNS (Dynamic Domain Name System) service registers its unique Domain name to a provided server and allows users to
use the same address name to access the DVR. Users may use 3
rd
Party DDNS service if they have an account instead of
dvrdomain.com.
Dvrdomain.com
-
Check

a checkbox of Dvrdomain.com to use dvrdomain.com.
-
As for DDNS Server, dvrdomain.com will be showing as default.
-
Port number 95 will be shown as default. (It’s possible to use 80 alternatively)
-
By pressing the ‘Get Domain Name’, the DVR activates DDNS services and brings a registered DDNS name. Users may
use this name as an IP address when they add a DVR on software.
DDNS