12
The XK Series device Connected with Keypad Reader:
The keypad reader can be 4 Bits, 8 Bits (ASCII), or 10 Bits output format. (when set to 10 Bits Output Format, when
the PIN is entered the output from the keypad is as per a Wiegand Card No.
Choose the below operation according to the PIN output format of your reader.
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. PIN input bits
8 (4 or 8 or 10) #
(factory default is 4bits)
(Pre-Set in the factory after a ‘Factory default’ is
10 Bit Output format)
3. Exit
*
Remarks:
4 means 4 bits, 8 means 8 bits, 10 means 10 digits virtual number.
Add PIN Users:
To add PIN users, after enter into programming mode on the XK Series device, PIN(s) can be input/ added on either the
XK Series device controller or the external Keypad Reader.
Delete PIN Users:
the same way as add users.
