14
ADVANCED APPLICATION
User Information Transfer
The XK Series device supports the User Information Transfer function, and the enrolled user (cards, PINs) can be
transferred from one (let’s name it ‘Master Unit’) to another (let’s name it ‘Accept Unit’).
Connection Diagram:
Remarks:
●
The ‘Master units’ and ‘Accept units’ must be XK Series or Sboard.
●
The Master Code of the ‘Master Unit’ and the ‘Accept Unit’ must be set to the same.
●
Program the transfer operation on ‘Master Unit’ only.
●
If the ‘Accept Unit’ is already with the users enrolled, it will be covered after transferring.
●
For full 1000 users enrolled, the transfer takes 3 minutes.
Set Transferring on ‘Master Unit’:
Programming Step
Keystroke Combination
1. Enter the programming mode
* (Master Code) #
2. Set transferring
9 6 #
Within 3 minutes, Green LED shines, after one beep, the LED will turn into Red, which means the
users’ information has been transferred successfully.
3. Exit
*
