11
CONTROLLER MODE
The XK Series device can work as Controller, connected with the external Wiegand reader.
(Factory default mode)---7 2 #
Connection Diagram
Attention
: Install a 1N4004 or equivalent diode is needed when use a common power supply, or the reader might be
damaged. (1N4004 is included in the packing)
Set Wiegand Input Formats
Please set the Wiegand input formats according to the Wiegand output format of the external Reader.
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. Wiegand input bits
8 (26~37) #
(factory default is 26bits)
3. Exit
*
Programming
- Basic Programming is the same as Standalone Mode
- There are some exceptions for your attention:
The XK Series device Connected with External Card Reader:
If EM card reader: users can be added/deleted on either the XK Series device or external reader.
If Mifare reader: users
can only be
added/deleted on external reader.
