Ness Security Products Securityguard III, Programming Manual

Page: 27 / 30

Doc ID. SG3PROG00103_03_2014.DOC 27
Radio Jamming chirp chirp, followed by
“Warning! Radio jamming detected. Check cause of radio
interference”
Radio Message
Substitution chirp chirp, followed by
“Warning! Radio tamper detected. Check cause of radio
interference”
Step through event log entries by
pressing OFF button:
Sensor alarm - “Alarm from sensor two. Check for forced entry”
Key (Panic) alarm - “Panic alarm from key one”
Siren Tamper - “Check outside siren for tamper”
Sensor Tamper -
“Check sensor two for tamper”
Radio Jamming - “Radio jamming detected. Check for cause of radio
interference”
Radio Message
Substitution - “Radio tamper detected. Check for cause of radio
interference”
3. Low battery
System in any mode:
(all events) - -
Disarming system or step through
event log entries by pressing OFF
button:
Main unit chirp chirp, followed by
“Low battery in main unit. Plug in battery charger for
twenty-four hours”
Radio Device chirp chirp, followed by
“Low battery in key [or sensor, doorbell, panic button] one.
Replace battery”
Dialler Battery Low chirp chirp, followed by
“Low battery in dialler unit. Check power”
4. Fault (“trouble”) events Event first occurs (i.e. fault is
detected)
(all events) chirp chirp
Disarming system or step through
event log entries by pressing OFF
button:
Sensor Fail chirp chirp, followed by